- -15%
CARPRO Clearcut Compound fast cut compound
In Stock
€16.91
€19.90
-15%
Tax included
CARPRO ClearCut provides exceptional cut in very little time whilst creating a minuscule amount of dust.
While its cutting capabilities are extraordinary, the finish can also surprise you. With the capability of removing scratches as deep as P1000 CARPRO ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on many med-to-hard paintworks.
Cut: 10
Gloss: 6
Features:
- Next-Gen compound.
- Cuts FAST!
- Saves time.
- No wax, fillers or silicone.
- Low dusting.
- Removes p1200 grit and up.
- Body shop safe.
- Compatible with both dual action and rotary machine.
- Compatible with a variety of foam, microfiber, and wool pads
Directions:
- Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product.
- Spread product across section.
- Raise speed to HIGH speed with LOW pressure .
- Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass.
- Increase pressure with each pass, finishing down with heavier pressure .
- When scratches are gone or polish has been worked through, wipe clean with microfiber towel.
- Clean pad.
- Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
Size: 250 ml, 1 l
You might also like